Description
The EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.
You could also just grab a new kit to switch up the colour scheme on your bike if you like!
The EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less. without the need to remove the star nut or thread your steerer tube.
See the link to the complete installation instructions HERE (be sure to give it a good read through before you begin!)
Specs: The kit Contains.
- 1x Inner Carrier (available in various colours)
- 1x Outer Carrier (black)
- 1x Flat-Head Bolt. M6x30
- 1x Socket-Head Bolt. M6x85 (installation)
- Does not include the EDC tool.
Ensure your fork is compatible – Very Important!
Incompatible forks:
- Giant Overdrive 2
- Cannondale Lefty
- Anything with a carbon steerer
Steerer tube inner diameter:
The inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure. you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.
Steerer tube length:
Most forks are compatible. except for a small number of forks with very short steerer tubes. For the following cases. your fork steerer tube length must meet the minimum length requirement.
- Fox (not incl Fox 38): 190mm minimum
- Fox 38: 210mm minimum
- RockShox Forks: 210mm minimum
Measure from the underside of your fork crown to the top of your spacer stack. or top of your stem if you are not running any spacers above your stem.
Reviews
There are no reviews yet.